AEG Dishwasher Error Code 50

AEG Dishwasher Error Code 50 Explained (and How to Fix It!)

There is something inherently stressful about seeing an error code you are not familiar with when your dishwasher suddenly stops. If your AEG dishwasher shows Error Code 50, well, this is relatively normal, and with the proper guidance, it’s usually pretty easy to sort out. This how-to guide will walk you through what Error 50 means and a few possible causes with step-by-step actions on how to repair it. Let’s get your dishwasher running as good as new!

What Does Error Code 50 Mean?

In most cases, error code 50 is associated with either a problem with the motor or its circuit. In the majority of cases, this indicates a problem with the washing motor, which is responsible for the circulation of water throughout the dishwasher. If it does not function properly, then this appliance cannot perform the way it is supposed to during the cleaning cycles.

While that does sound technical, the good news is that it can be due to a number of fairly simple reasons.

Potential Causes for Error Code 50:

  • jammed/destructed motor: an obstruction such as an amount of debris and food particles jammed the motor. There also can be an issue with faulty motor;
  • damaged motor connection: the engine can’t operate because wires got loose or even damaged.
  • Control Board Problem: An issue with the electronic control board of the dishwasher may be inhibiting the motor.
  • Overheating: The motor might have previously overheated and caused a self-shutdown for protection.

Identification of the actual cause will constitute the real problem-solving basis.

How to Fix Error Code 50, Step by Step

The approach toward rectifying this situation will involve the following systematic process:

Step 1: Switch It Off and Check on Safety

First, disconnect your dishwasher from the power supply before attempting to begin any kind of checking to avoid possible electric shock. Your hands should be dry, and the dishwasher shouldn’t be connected to the water supply. Safety first!

Step 2: Check for Blockages

Open the dishwasher door and examine the bottom of this appliance for food or broken glass that might cause the motor to jam and give Error 50. Remove carefully if there is something in its path, after which clean off residual dirt with a soft, damp cloth.

Step 3: Check the Washing Motor

If no evident blockages come into view, then the motor itself will have to be checked:

  • Reach the motor by removing the lower panels from your dishwasher; refer to your dishwasher’s manual for this.
  • Check for any blockages or build-up of debris that may be affecting the movement of the motor.
  • If the motor seems damaged – worn-out parts, burning smell, etc. – it should be replaced.

Step 4: Check the Wiring and Connections

Check wiring from the motor and make sure that all the connections are tightened. It can be that a loose wire may cause it. Look for any visible signs of damage such as frayed wires, burns, or corrosion. These will need professional repairs if damaged.

Step 5: Test the Motor’s Functionality

If you have a multimeter and know how to use it, you can check the motor’s electrical resistance. Your user’s manual should give you an acceptable range of resistance readings for your model; if the reading is outside of this range, then the motor is probably bad.

Step 6: Control Board Reset

Sometimes, Error 50 results from a glitch in the control board. Try resetting it by flipping off the power source to the dishwasher for 10-15 minutes. Then reconnect the power and check whether the error code clears.

Step 7: Call a Professional

If the above steps fail to resolve the problem, it is time to seek the services of a qualified technician. The problem could be complex, requiring advanced tools or expertise. For example, replacing a damaged motor or control board is best left to a professional. First, check to see if your dishwasher is still under warranty—repairs may be covered.

How to Prevent Future Errors

Although some issues can’t be entirely avoided, taking good care of your dishwasher will decrease the chances of seeing Error Code 50 again. The following are simple tips for prevention:

  • Regular Cleaning – Clean debris and food particles from filters, spray arms, and the base periodically.
  • Avoid Overloading – Avoid overloading the dishwasher, which can put pressure on the motor. Stick within the manufacturer guidelines for capacity.
  • Run Hot Cycles: Running a hot cycle once every month with a dishwasher cleaner in it helps to dissolve grease and keeps blockages away.
  • Check for Wiring: If your dishwasher is old, then occasionally check for wear and tear in the wires and their connections.

Wrapping Up

Although Error Code 50 may seem daunting, once you understand what it is and how to fix it, the repair is quick and relatively easy in most instances. First, start with the most simple things to check for, like blockages and loose connections, then go on through the steps. If you are still stuck, do not hesitate to consult a professional.

Taking good care of your dishwasher will reduce the potential for this, or any other type of error, occurring in the future. You can share below what you have been through in diagnosing or fixing Error 50. Your effort will save a lot of time and frustration for others while trying to troubleshoot the problem.

Click to rate this post!
[Total: 0 Average: 0]
Spread the love