Table of Contents
What does it mean by Frigidaire dishwasher error code i20?
Uh-oh! If you’ve found yourself staring at your Frigidaire dishwasher’s error code i20, it’s time to roll up your sleeves-but don’t worry, we’re here to help! It is not the end of the life of your dishwasher. In simple terms, the i20 error code is your appliance’s white flag, waving and saying, “Hey, something’s wrong with my drainage system.” Well, you are in luck because fixing it might be a lot easier than you think!
Let’s break down what this error code means, why it pops up, and the steps you can take to get your dishwasher back in tip-top shape.
What Causes the i20 Error Code?
The error code i20 simply means that your dishwasher is experiencing problems draining the water. It means that the sensor is reporting an issue in the water pressure or that the water passage ways are clogged, hence hampering the flow of water from the machine as required. That does sound like a lot, but fear not-this problem generally gets fixed with some troubleshooting. Common culprits causing the i20 fault include:
- Clogged Filter – A dirty or blocked filter can restrict water from draining effectively.
- Obstructed Drain Hose – If the drain hose has blockages or twists, water won’t flow out as it’s supposed to.
- Faulty Water Pressure Sensor – This sensor monitors water levels and ensures the dishwashing cycle runs smoothly. If it malfunctions, you’ll see the dreaded i20 error.
- Garbage Disposal Connection Issue: If your dishwasher is connected to a garbage disposal, leftover food debris may be clogging the system.
Now that we understand why this error appears, it’s time to tackle the fix!
How to Fix a Frigidaire Dishwasher i20 Error
Don’t worry many i20 issues can be fixed without calling in a repair technician. Here’s how to troubleshoot and perhaps repair the problem:
Step 1: Clean the Filter
Start with the easiest solution. Your dishwasher filter captures debris and food particles but in return, clogs itself and therefore causes inadequate draining of water.
- The filter usually sits at the bottom of your dishwasher beneath the lower spray arm.
- Remove the filter and give it a good rinse under warm water. Use a soft brush to scrub away any stubborn particles or grease.
- Reinstall the filter and run a quick rinse cycle to see if the error clears.
- Pro Tip: Make cleaning your dishwasher filter a regular habit to prevent i20 errors in the future!
Step 2: Check the Drain Hose
The next possible culprit is the drain hose. A kinked or blocked hose can stop water from draining and trigger the error code.
- Turn off the dishwasher and locate the drain hose-usually at the back.
- Inspect it for kinks, twists, or clogs.
- If you spot a blockage, carefully remove it using a long, flexible brush or by flushing the hose with water.
- Ensure the hose is properly connected and not kinked after being reinstated.
Step 3: Check the Garbage Disposal and Clean It
If your dishwasher is connected to a garbage disposal, leftover food particles from your disposal may have caused a blockage in the connected drain line.
- Switch off both the dishwasher and the garbage disposal.
- Check the disposal for blockages and clean it out thoroughly.
- Check the knockout plug-small plastic piece in the disposal’s dishwasher inlet. If it has not been removed, it can block the water flow. Remove it if so.
Step 4: Check the Water Pressure Sensor or Replace
If cleaning the filter and drain system does not work, then the problem may be caused by the water pressure sensor. It is a sensor inside the dishwasher that monitors the water level in it.
- Reach the sensor by looking at your dishwasher manual for instructions.
- Ensure that it does not have any accumulation on it or is damaged. Sometimes a dirty sensor can be cleaned using a soft cloth and cleaning solution.
- If it can’t be cleaned, then the sensor probably needs to be replaced. You can find the replacement parts online or hire a professional to do it for you.
Step 5: Restart the Dishwasher
Sometimes, simply restarting your dishwasher after performing these steps can help reset the error code. After cleaning and checking all of the components in the above steps:
- Switch your dishwasher off and pull the plug out of the wall.
- Wait 10 minutes, then plug it back in.
- Run a test cycle to see if the i20 error is resolved.
When to Call a Professional
If the above steps do not help in clearing the error after trying everything, it’s time to contact a technician. Although many i20 issues are easy to solve, other more serious issues involving the failing of a pump or an internal wiring problem really demand a technician’s skill and expertise.
Don’t view this as defeat since technicians can identify what went wrong quickly to have your dishwasher working again like it just came off the assembly line. Plus, early problems can prevent bigger, more costly repairs later on.
Keep Your Dishwasher Running Smoothly
Save yourself from future i20 headaches by keeping your dishwasher maintained. Follow these few tips to keep your appliance running:
- Clean the filter at least once a month.
- Scrape food scraps off dishes before loading into the dishwasher.
- Sometimes check the drain hose for blockages or kinks.
- Run a cleaning cycle with dishwasher-safe cleaner every few months to remove grease and buildup.
Conclusion
Though Frigidaire’s i20 error might appear daunting at the first approach, most times, it only takes some patience and a few basic steps to get it running. Troubleshooting problems ranging from simple things like a clogged filter to something technical such as a faulty sensor helps you save your time, avoids stress, and is inexpensive.
Otherwise, when your dishwasher’s problem still is around after fixing things yourself, be willing to call for expert repair service assistance. And last but not least, remaining current with routine checkups and procedures assures that the running of your dishwasher will remain non-restricted smooth sailing-and that a pesky code like ‘i20 won’t throw off an otherwise unflappable daily regime.
Just happy dish washing! And also, if some further recommendations or questions are there about an i20 fault-do provide them below within comments.