Table of Contents
Understand and Repair Hoover Dishwasher Error 18
The Hoover dishwasher is the workhorse for any household; it saves time and manual effort taken in cleaning up dishes. Of course, even the most reliable appliances develop faults. One of the frequent issues reported by users of Hoover dishwashers is Error Code E18. It sounds like a big deal but is actually not that complicated if treated properly.
Everything that you want to know about Hoover Dishwasher Error 18: what it is, why it occurs, and how it is effectively fixed.
What does this error code 18 mean?
Error 18 on Hoover dishwashers is generally a drainage fault. During such an error, the dishwasher is unable to push out the wastewater; therefore, some water may still remain inside the machine after a cycle. It is mainly related to blockages, the draining pump, or problems with the drainage system itself.
So, this is something that requires urgent attention so that it does not rain on the performance of your dishwasher and invite further serious trouble like water overflow or internal parts damage.
Common Causes of Error 18
There could be a few causes for Error 18 to strike. Now, let’s see what the most frequent causes are:
- Blocked Drain Hose: It might be kinked or clogged somewhere inside the hose and hence hamper the water to come out.
- Clogged Filters: The collection of food residues and grease in the filters will hinder the efficiency of water drainage.
- Faulty Drain Pump: The drain pump will finally give up after wear and tear or small blockages over a period.
- Clogged Sink or Sewer: The blockage of the sink or sewer that is connected may be the cause of backflows to occur into the machine.
- Sensor Fault: A faulty water-level sensor may incorrectly detect a blockage and send an error signal.
Step-by-Step Repair of Hoover Dishwasher Error 18
Try these steps to troubleshoot yourself before calling a technician.
1. Switch Off and Check the Machine
First and foremost, turn the dishwasher off and pull its power plug off the power supply. Let the machine cool down to prevent injuries in case some parts are still hot from the last cycle.
2. Look for Blockages
Drain Hose This may be clogged at the back and kinked or bent. Take it off and rinse under warm running water to eliminate buildups.
Filters Situated mostly at the bottom of the dishwasher, usually behind the front panel at the bottom: Remove and rinse them under running water. A soft brush helps remove grease or food particles.
Look at the Drain Pump Reach the drain pump by following instructions in your user manual. See if something inside it, like food pieces, broken glass, or any other alien thing, is blocking it.
3. Check Your Sink’s Drainage System
For a more serious plumbing problem, take the time to make sure your sink and its associated pipes are clear of blockages. Run some water in the sink to ensure it does not drain very slowly.
4. Power Cycle the Dishwasher
Plug it back in, turn it on, and run a quick cycle to see if the problem goes away.
5. Diagnostic Cycle
Some Hoover models even have a diagnostic mode that can be activated with the use of your user manual and may provide further insight into your issue.
When to Call a Professional
If you’ve followed all the steps above and Error 18 still appears, the issue may require professional attention. Problems such as a broken drain pump, a defective water-level sensor, or internal wiring issues might be beyond DIY solutions.
A certified Hoover technician can diagnose and resolve these more complex issues. It’s reassuring to know that with prompt action, even challenging problems like Error 18 can be repaired effectively.
Preventing Future Drainage Issues
These are some of the preventive measures to avoid Error Code 18 again:
Clean Filters: Clean your dishwasher filters at least once a week to avoid the building up of food particles. Rinse Dishes Before Loading: Wipe off plates of excess food particles to prevent clogs from happening. Periodically Check the Hoses: Keep the drain hose clear and properly connected. Recommended: Use recommended dishwasher detergent. Using quality detergents and additives will help keep grease buildup minimal. These habits will let you get years of optimal use out of your dishwasher.
Keep Your Dishwasher Running Perfectly
Hoover dishwashers are designed to make life easier, but even the best machines reap benefits from being taken care of. Since Error 18 is solvable-it is at times brought about by small issues, including blockages-it does not have to stop your day. The steps above will attend to the problem much faster so that your dishwasher can revert to its normal effectiveness.
Looking for more tips on maintaining your appliances? Explore our blog for expert insights and advice. If you’re unable to resolve the issue, don’t hesitate to contact Hoover’s customer service for further assistance.