How to Hook Up a Bosch Dishwasher Silence Plus 44 dBA to Water Supply

In the world of kitchen appliances, Bosch has long been synonymous with quality and innovation. When it comes to dishwashers, the Bosch Silence Plus 44 dBA is a top-notch choice for those seeking a quiet and efficient cleaning companion. However, setting up such a sophisticated machine to your water supply may seem like a daunting task. Fear not, for we, the experts in this field, are here to guide you through the process seamlessly.

Gather Your Tools and Materials

Before embarking on the journey to connect your Bosch Silence Plus 44 dBA dishwasher to the water supply, it’s essential to gather all the necessary tools and materials. Here’s a list of what you’ll need:


  • Adjustable wrench
  • Screwdriver (Phillips and flathead)
  • Pipe wrench
  • Plumber’s tape
  • Bucket


  • Bosch Silence Plus 44 dBA dishwasher
  • Water supply line
  • Dishwasher installation kit (usually included)
  • Drain hose
  • Hose clamp
  • Safety goggles (for added protection)

Locate the Ideal Spot

The first step is to identify the perfect spot for your Bosch dishwasher. Ensure it’s close to both an electrical outlet and the water supply. Keep in mind that the dishwasher should be leveled to prevent any leaks or instability during operation.

Shut Off the Power and Water

Safety first! Before you commence the installation process, turn off the power and water supply to the area where you’ll be working. This step is crucial to avoid accidents and mishaps.

Remove the Kick Plate

The kick plate is usually located at the bottom of the dishwasher. Using your screwdriver, carefully remove it to access the lower front area of the dishwasher.

Connect the Water Supply Line

Now, it’s time to connect the water supply line. Follow these steps:

  1. Attach one end of the water supply line to the dishwasher’s inlet valve, usually located at the bottom of the machine.
  2. Secure the other end to the water supply valve under your sink.
  3. Use an adjustable wrench to ensure a tight connection.
  4. Apply plumber’s tape to the threaded connections for added security.

Connect the Drain Hose

The next step is to connect the drain hose. This hose is responsible for carrying wastewater away from the dishwasher. Here’s what you need to do:

  1. Connect one end of the drain hose to the dishwasher’s drain outlet.
  2. Attach the other end to the air gap or garbage disposal unit under your sink.
  3. Use hose clamps to secure the connections.

Check for Leaks

With all the connections in place, it’s time to turn the water supply back on. Keep a keen eye on all the connections for any signs of leaks. If you spot any, tighten the connections as needed.

Test the Dishwasher

Before you call it a day, it’s essential to run a test cycle to ensure everything is functioning correctly. Follow these steps:

  1. Plug in the dishwasher and turn on the power.
  2. Start a short wash cycle to check for any leaks or unusual noises.
  3. Monitor the entire cycle to confirm that the dishwasher is operating smoothly.

Wrapping Up

Congratulations! You’ve successfully hooked up your Bosch Silence Plus 44 dBA dishwasher to the water supply. Now, you can enjoy the convenience of this remarkable kitchen appliance. Remember to always follow the manufacturer’s instructions for the best results and a long-lasting dishwasher.

Click to rate this post!
[Total: 0 Average: 0]