Kogan Dishwasher E3 Error Code

How to Easily Solve the Kogan Dishwasher E3 Error Code

If you’ve encountered the dreaded E3 error code on your Kogan dishwasher, don’t stress-help is here! This common error might be a bit frustrating, but with a little troubleshooting, you’ll have your dishwasher back to sparkling those dishes in no time.

Here’s everything you need to know about the E3 error, what causes it, and-most importantly-how to fix it.

Understanding the E3 Error Code

The meaning of the E3 error code mainly denotes some issue with the heating of water. In other words, your Kogan dishwasher is trying to tell you that it’s taking too much time than usual to heat the water. This could be due to a number of reasons such as clogging in the filter, faulty heating element, or even due to some technical glitch.

But do not get rattled you don’t need super tech-savant powers to sort this problem out. Here come the instructions in which you may be able to troubleshoot and finally clear the E3 error just at home.

Step-by-Step Troubleshooting Guide

Step 1: Water Temperature Check

The dishwasher, since dependent on its water supply through inlet heating, must require the sufficiently raised temperature on entering the intake or else this gadget could just fail to climb to the desirable temperatures.

Now turn on your kitchen tap and see the temperature of the water. The temperature should be around 120-140°F or 49-60°C.

If it takes more than usual to get the water hot, then you may want to adjust the temperature setting on your water heater.

Step 2: Filter in the Dishwasher

The filter causes poor water flow and may block up and hamper operation of the dishwasher as it should. Take a few minutes to clean the filter and get things running again smoothly.

  • Locate the filter at the bottom of your dishwasher.
  • Gently remove the filter and rinse it under warm water to clear any debris or food particles.
  • Reinstall the filter securely before running another cycle.

Step 3: Check the Spray Arms

If there is a blockage or dirt inside the spray arms, that can also be one of the reasons for the E3 error code. If water isn’t passing freely through these important parts, your dishwasher might not heat up as it should.

  • Remove the spray arms from the dishwasher.
  • Clean out the blockages in the nozzles with a small brush or toothpick.
  • Rinse the spray arms well and refix them.

Step 4: Heating Element Check

If the above steps have been tried and the error persists, then the heating element could be the culprit. This component is responsible for heating water during the wash cycle.

  • Unplug the dishwasher and locate the heating element-usually at the bottom of the tub.
  • Inspect it for visible damage, like cracks or burn marks.
  • If the heating element seems to be at fault, then it needs to be replaced. You can contact Kogan’s customer service for this or hire a professional to help you with the repairs.

Step 5: Power Cycle the Dishwasher

Sometimes, the E3 error is due to a temporary glitch in the system. A simple reset might solve the problem and nothing else may be required.

  • Switch the dishwasher off and pull the plug out of the wall outlet.
  • Wait for about 10-15 minutes.
  • Plug the dishwasher back in and restart to see if the error clears.

When to Call for Professional Help

If the above steps do not work, it is time to seek professional help. The problem might be in the thermostat, control board, or internal wiring and requires the services of a professional.

Kogan’s customer support team is always ready to help, or you can consult a trusted appliance repair technician in your area.

Keep Your Dishwasher Running Smoothly

It has been said that the best way to avoid experiencing an E3 error-or any issue for that matter-is regular maintenance. This means cleaning the filter every couple of weeks to avoid clogs, rinsing most food particles off dishes before loading them, and running a dishwasher cleaner through the machine once a month to remove limescale and buildup.

Closing

Don’t let an E3 error ruin your day. Dishwasher hiccups, they do not call for fear. With a little patience and some know-how, you can fix that E3 error code with confidence and go back to enjoying spotless dishes.

If you are still having issues, there’s no problem in reaching out for help. Try these tips today, and keep your dishwasher running like a dream!

Got questions or need more tips? Leave a comment below we’d love to hear from you!

Click to rate this post!
[Total: 0 Average: 0]
Spread the love