Neff Dishwasher Fault Codes - 2025

Neff Dishwasher Fault Codes – Comprehensive Guide

Fault Code	Description	Possible Solutions
E01	Water inlet fault – Dishwasher can’t fill properly	Ensure water supply is on Check inlet hose for kinks or blockages Inspect inlet valve
E02	Drainage fault – Water not draining properly	Clean the drain filter Check drain hose for blockages Inspect drain pump
E03	Heating fault – Water not heating correctly	Check heating element Test thermostat Replace faulty components
E04	Overfill/Leakage – Too much water detected	Inspect water level sensor Check for leaks around the door Ensure proper water pressure
E05	Motor fault – Wash motor issue	Verify motor operation Replace if faulty
E06	Door lock issue – Problem with door latch	Inspect door lock mechanism Check latch alignment Replace faulty lock
E07	Turbidity sensor fault – Water clarity sensor issue	Clean the sensor Check wiring connections Replace sensor if needed
E08	Diverter valve fault – Water distribution issue	Inspect diverter valve Ensure valve is not stuck Replace faulty components
E09	Heating system fault – General heating problem	Check heating element Inspect connections Replace damaged parts
E10	Circulation pump fault – Water not circulating properly	Inspect circulation pump Clean impeller Replace if defective
E11	Drying system fault – Drying fan issue	Check drying fan operation Inspect heating element Replace faulty parts
E15	Leakage detected – Anti-flood system triggered	Inspect for leaks under dishwasher Fix leaking pipes or hoses Ensure proper drainage
E22	Blocked filter or spray arm – Water flow issue	Clean dishwasher filter Ensure spray arms are free of debris
E25	Drain pump problem – Pump failure affecting drainage	Clean and inspect drain pump Replace if necessary

Click to rate this post!

[Total: 0 Average: 0]

Spread the love