Beko Dishwasher Fault Codes and Solutions
| Fault Code | Description | Cause | Solution |
|---|---|---|---|
| E01 / H1 | Water Inlet Fault | Issues with water supply, inlet valve, or hose | Check water supply, inspect inlet hose, clean inlet filter, test inlet valve |
| E02 / H2 | Drainage Fault | Clogged drain hose, dirty filters, faulty pump | Clean filters, check drain hose, inspect drain pump |
| E03 / H3 | Heating Fault | Faulty heating element or thermostat | Check heating element, inspect thermostat, control board issue |
| E04 / H4 | Overflow/Leakage Fault | Water overflow, faulty inlet valve, leaks | Inspect for leaks, check water level sensor, verify inlet valve |
| E05 / H5 | Motor Fault | Issues with wash motor | Check motor connections, test motor, inspect control module |
| E06 / H6 | Pressure Switch Fault | Faulty pressure switch, clogged air chamber | Clean air chamber, test pressure switch |
| E07 / H7 | Turbidity Sensor Fault | Sensor malfunction, dirty sensor | Clean sensor, replace if needed |
| E08 / H8 | Diverter Valve Fault | Stuck or defective diverter valve | Inspect valve, test for power, replace if faulty |
| E09 / H9 | Water Softener Fault | Issue with water softener unit | Check salt level, inspect valve |
| E10 / HA | Circulation Pump Fault | Faulty circulation pump | Inspect pump, check electrical connections, replace pump |
Click to rate this post!
[Total: 0 Average: 0]
