Dacor dishwasher LC code is not a standard error code documented in official Dacor service manuals or high-authority appliance resources for their dishwasher models.
Dacor dishwashers (primarily undercounter models like the MDW series) use numeric codes such as CL (close/lock door), CF (clean filters), LO (low rinse aid), or 01-04 (time delay hours), with no mention of “LC.”
“LC” appears more commonly as a leak detection or leak control error on other brands like Samsung (LC/LE for base moisture), suggesting possible model confusion or display misreading.
Confirming Dacor vs. other brands
Dacor’s published fault codes focus on door status, filters, and basic diagnostics rather than leak sensors.
- No LC in Dacor MDW documentation: Service resources list CL, CF, LO, but LC is absent from model-specific guides.
- Brand mismatch likely: Samsung, LG, and some Chinese brands use LC for leak/moisture detection in the base pan.
If your unit shows “LC,” verify the brand/model sticker inside the door. Dacor errors typically flash numeric or abbreviated codes like E:01 for specific failures.
If LC appears (possible leak/generic case)
While not Dacor-specific, “LC” universally signals leak detection across dishwashers with moisture sensors. Common triggers:
- Base pan water: Leaks from hoses, seals, or overfill collect under the tub.
- Door gasket failure: Worn rubber lets spray escape.
- Loose hose fittings: Inlet/drain connections drip during cycles.
- Filter/sump clogs: Overflow mimics leakage.
Basic response: Unplug, tilt unit to drain base, dry thoroughly, reset power.
Dacor-specific troubleshooting approach
For confirmed Dacor models (e.g., MDW24P, MDW28), use these steps when any fault appears:
- Power cycle: Unplug 5–10 min; clears temporary glitches.
- Check filters (CF code equivalent): Twist out bottom filter; rinse debris.
- Door/lock (CL code): Ensure door latches fully; clean gasket.
- Rinse aid (LO code): Refill dispenser.
- Test empty cycle: Run shortest program; monitor for water under unit.
Dacor lacks a dedicated leak code like LC; persistent water issues suggest hose/door problems.
When to contact Dacor service
- No standard LC fix exists: Dacor support confirms their codes don’t include LC.
- Warranty active: DIY risks voiding coverage.
- Water visible: Leaks demand immediate pro inspection to prevent cabinet damage.
Call Dacor at 833-844-1118 (US) with model/serial for exact diagnostics.
Model verification checklist
| Suspected Code | Likely Brand | Meaning | First Fix |
|---|---|---|---|
| LC | Samsung/LG | Leak/base moisture | Tilt/dry base |
| CL | Dacor | Close/lock door | Latch door fully |
| CF | Dacor | Clean filters | Rinse bottom filter |
| LO | Dacor | Low rinse aid | Refill dispenser |
FAQs: Dacor dishwasher LC code
Does Dacor use an LC error code?
No. Dacor dishwashers don’t have LC in their standard error code list. Common codes are CL (door), CF (filters), LO (rinse aid).
What if my Dacor shows LC?
Verify brand/model sticker. LC is common on Samsung/LG for leaks. Could be misread CL or wrong brand identification.
Could LC mean leak on Dacor?
Unlikely. Dacor lacks documented leak codes like LC/LE. Water issues show as door/filter faults or no code.
How do I confirm my Dacor model?
Check door interior sticker for exact model (MDW24P, etc.) and brand confirmation.
What are real Dacor error codes?
CL (close door), CF (clean filter), LO (low rinse aid), numeric E:01-E:04 for delays/faults.
Safe to ignore LC on Dacor?
No. If water visible, treat as leak regardless of code. Unplug and inspect base immediately.
Next step if LC persists?
Photograph display + model sticker. Call Dacor service (833-844-1118) with both for proper diagnosis.
Samsung/LG showing LC instead of Dacor?
Very possible. LC/LE = leak detection. Tilt/dry base pan is standard first fix for those brands.
