Caple Dishwasher Fault Codes and Solutions
| Fault Code | Meaning | Solution |
|---|---|---|
| F1 | Water inlet problem (low or no water pressure) | Verify water supply valve is open and operational. Examine inlet hose for any twisting or debris accumulation. Remove and clean the water inlet filter thoroughly. |
| F2 | Draining issue (water not draining properly) | Investigate drain hose path for potential blockages. Verify drain pump functionality and performance. Remove and thoroughly clean all filtration components. |
| F3 | Heating issue (water not reaching the required temperature) | Conduct thorough examination of heating component and temperature regulation system. Redistribute dishes if machine appears overcrowded. |
| F4 | Overflow detected (water leakage or excessive water level) | Perform thorough inspection beneath unit for water escape points. Evaluate float mechanism and drainage pathway integrity. |
| F5 | Overfilling issue | Assess water inlet valve operation and float switch functionality. Confirm proper water levels during manual filling operations. |
| F6 | Faulty temperature sensor (NTC sensor error) | Evaluate temperature sensor connection integrity. Consider sensor replacement if diagnostic tests indicate failure. |
| F7 | Flow meter issue (incorrect water flow detection) | Conduct comprehensive check of water entry system and flow measurement device. Confirm water pressure meets manufacturer specifications. |
| F8 | Turbidity sensor problem (water not clean enough) | Perform maintenance cleaning of turbidity detection system and filter components. Evaluate cleaning agent quality and rinse aid reservoir levels. |
| F9 | Water circulation error (pump not working properly) | Assess circulation pump condition and clear any spray arm obstructions. Ensure proper water distribution throughout system. |
| F10 | Door lock issue (door not closing properly) | Perform door latch alignment check and adjustment if needed. Examine door seal for debris or damage affecting closure. |
Click to rate this post!
[Total: 0 Average: 0]
