Table of Contents
How to Fix an AEG Dishwasher Error Code E30
Your AEG dishwasher is a reliable ally in the kitchen but even the best appliances can sometimes encounter problems. If your dishwasher is displaying the error code E30, don’t panic! This code signifies an issue with water leakage or the flood protection system. The good news? You can often resolve this issue without needing professional help.
Here’s a structured guide to understanding and fixing the E30 error code.
Understanding Error Code E30
The E30 error code typically indicates that your dishwasher’s leak protection system has been activated. This usually happens when:
- Water has leaked into the base of the machine, triggering a safety float switch.
- There’s an internal fault causing the flood protection system to engage.
The root cause might be as simple as a loose hose or as complex as a faulty component. But with the right steps, you can troubleshoot effectively.
What to Do When You See Error E30
Follow these step-by-step instructions to identify and fix the problem:
1. Turn the Dishwasher Off
- For safety, start by turning off the dishwasher and unplugging it from the power outlet.
- If your dishwasher is hardwired, switch it off at the circuit breaker.
This ensures there’s no risk of electrical shock while you inspect the appliance.
2. Check for Leaks
- Pull the dishwasher out from under the counter (if it’s built-in) and inspect the base.
- Look for any visible signs of water leakage around the appliance or underneath it.
Leaks can occur due to worn-out seals, loose connections, or damaged hoses.
3. Inspect the Hoses
- Check the inlet and drain hoses for any cracks, blockages, or loose connections.
- The inlet hose: Connects the dishwasher to your water supply. If it’s loose or damaged, water can leak into the machine.
- The drain hose: Carries waste water out of the dishwasher. Ensure it’s properly secured and free of clogs.
If you spot a problem, tighten any loose connections or replace the hose if damaged.
4. Empty the Base
- Tip the dishwasher slightly backward (approximately 45 degrees). This will help drain any water that has collected in the base.
- Place towels underneath to catch any water.
This step often resets the flood protection system, clearing the error.
5. Inspect the Float Switch
- Open the dishwasher door and locate the float switch (usually at the bottom of the dishwasher).
- Gently lift and release the float to ensure it moves freely. A stuck float can mistakenly signal that there’s a water leak.
If the float is dirty or obstructed, clean it carefully with a damp cloth.
6. Restart the Dishwasher
Once you’ve checked for leaks and cleared the water from the base, plug the dishwasher back in and run a test cycle. Keep an eye on its operation to ensure the error does not reoccur.
When to Call a Professional
If you’ve followed these steps and the error persists, it’s time to call in a qualified AEG technician. The problem might be caused by:
- A faulty pump
- A damaged float switch
- An issue with the control board
These issues may require specialised tools and expertise to diagnose and repair.
Preventing Error Code E30 in the Future
To minimise the risk of encountering this error in the future, follow these tips:
- Regular Maintenance:
- Clean the filters and check for blockages in the drain regularly.
- Inspect the seals on the door and hoses for signs of wear.
- Positioning:
- Ensure the dishwasher is level. An uneven appliance increases the risk of leaks.
- Check that hoses are securely connected and undamaged.
- Don’t Overload:
- Avoid overloading the dishwasher, as this can strain its components and lead to faults.
Final Thoughts
While an E30 error can be frustrating, it’s usually fixable with a little time and effort. By following the steps laid out above, most users can resolve the issue and get their AEG dishwasher back to doing what it does best making post-meal clean-up a breeze.
If you’ve attempted these fixes and still need help, don’t hesitate to contact AEG customer support or book a service appointment. A well-maintained dishwasher is key to making your kitchen run smoothly!
Have questions or tips of your own? Share them in the comments below.