Table of Contents
Bosch Dishwasher Red Light on Floor Blinking: What Does It Mean and How to Fix It
Bosch dishwashers are renowned for their durability, efficiency, and innovative features. One such feature is the red light projected onto the floor, known as the InfoLight. This light provides users with visual feedback about the dishwasher’s operation. However, if you notice the red light blinking, it may indicate a problem that requires your attention. In this comprehensive guide, we’ll explain the possible causes and solutions for a blinking red light on your Bosch dishwasher.
What Does the Blinking Red Light Mean?
The red light on the floor of a Bosch dishwasher is designed to indicate whether the appliance is running. When this light blinks, it typically signals one of the following:
- Door Not Properly Closed
- The dishwasher door must be securely latched for the appliance to operate. A blinking red light often indicates that the door is not fully closed.
- Cycle Paused
- If the dishwasher’s cycle is interrupted or paused, the red light may blink until the issue is resolved.
- Error in Operation
- Certain operational errors, such as water drainage or inlet problems, can trigger the blinking red light as an alert to the user.
Common Causes of the Blinking Red Light
1. Improper Door Closure
The most common cause of a blinking red light is a door that isn’t properly closed. This could be due to:
- Misalignment of the door: Ensure the door aligns correctly with the latch.
- Obstructions: Items such as utensils or dish racks might prevent the door from closing fully.
- Faulty door latch: If the latch is damaged or worn out, the dishwasher may not recognize the door as closed.
2. Interrupted Power Supply
Power fluctuations or interruptions can cause the dishwasher to stop mid-cycle, triggering the blinking red light. Check for:
- Power outages: Ensure your home’s power supply is stable.
- Loose connections: Verify that the dishwasher’s plug is securely connected to the outlet.
3. Error Codes
Bosch dishwashers often display error codes alongside the blinking red light. These codes provide specific information about the issue. For example:
- E15: Indicates water leakage into the base of the dishwasher.
- E24: Points to a drainage problem.
- E01 to E30: Various error codes that highlight specific faults, from heating issues to motor problems.
How to Fix the Blinking Red Light
1. Check the Door and Latch
- Open and close the dishwasher door firmly.
- Inspect the door latch for damage. If necessary, replace the latch to restore functionality.
- Remove any items obstructing the door.
2. Reset the Dishwasher
Resetting the dishwasher can resolve temporary glitches:
- Press and hold the Start/Reset button for 3–5 seconds until the dishwasher beeps.
- Wait for the dishwasher to complete its reset cycle, which may take a few minutes.
3. Address Error Codes
If the blinking red light accompanies an error code:
- Refer to the user manual for code-specific troubleshooting steps.
- For water leakage (E15), check the base of the dishwasher for water accumulation. Clean and dry the area if necessary.
- For drainage issues (E24), inspect and clean the drain hose and filter.
4. Inspect the Power Supply
- Ensure the dishwasher is securely plugged into a working outlet.
- Test the outlet with another appliance to confirm functionality.
- Avoid using extension cords, as they may cause power fluctuations.
5. Contact Bosch Customer Support
If the problem persists despite your efforts, it’s advisable to contact Bosch’s customer service. Provide them with the model number and any error codes displayed for faster assistance.
Preventing Future Blinking Red Light Issues
To minimize the likelihood of encountering a blinking red light on your Bosch dishwasher, follow these preventive tips:
1. Regular Maintenance
- Clean the filter and drain hose monthly to prevent clogs.
- Wipe down the door seal to ensure a tight closure.
2. Load the Dishwasher Correctly
- Avoid overloading the dishwasher, as this can obstruct the door and disrupt water flow.
- Place utensils and dishes in their designated racks to prevent interference with the spray arms or door mechanism.
3. Monitor the Power Supply
- Use a surge protector to safeguard the dishwasher from power fluctuations.
- Schedule regular checks of your home’s electrical system to ensure stability.
4. Address Issues Promptly
- Act quickly if you notice unusual behavior or error codes. Delaying repairs can worsen the problem and lead to costly fixes.
When to Seek Professional Help
While many issues causing a blinking red light can be resolved through troubleshooting, some situations require professional intervention. Contact a certified Bosch technician if:
- The problem persists despite troubleshooting.
- The dishwasher displays multiple error codes.
- You suspect a hardware failure, such as a faulty motor or control board.
By understanding the meaning of the blinking red light on your Bosch dishwasher and taking appropriate action, you can ensure your appliance runs smoothly and efficiently. Regular maintenance and timely troubleshooting are key to preventing recurring issues.