Running into an error code on your Hoover dishwasher? Don’t worry you’re not alone, and we’re here to help! Understanding these error codes can make troubleshooting a breeze and get your dishwasher back to sparkling your dishes in no time. Below, we’ve broken down the most common error codes, what they mean, and how to fix them.
Hoover Dishwasher Error Codes and Solutions
| Error Code | Description | Cause | Solution |
|---|---|---|---|
| E01 | Water Inlet Fault | Dishwasher isn’t filling | Check water supply, inlet valve, and hose. |
| E02 | Drainage Fault | Water isn’t draining | Clean filter, check drain hose, and inspect pump. |
| E03 | Heating Fault | Water isn’t heating | Test heating element and thermostat. |
| E04 | Overflow/Leakage | Too much water or a leak detected | Check water level sensor, inlet valve, and hoses. |
| E05 | Motor Fault | Issue with wash motor | Check motor functionality, replace if faulty. |
| E06 | Pressure Switch Fault | Water level detection issue | Test and replace the pressure switch if needed. |
| E07 | Turbidity Sensor Fault | Water clarity sensor issue | Clean or replace the turbidity sensor. |
| E08 | Diverter Valve Fault | Water not reaching spray arms | Inspect and replace diverter valve if needed. |
| E09 | Water Softener Fault | Water softener not functioning | Check salt levels and clean regeneration valve. |
| E10 | Circulation Pump Fault | Pump not operating properly | Test pump motor and clean pump. |
| E11 | Drying System Fault | Dishwasher isn’t drying properly | Check drying fan, heating element, and vents. |
| F1 | Water Inlet Problem | Dishwasher isn’t filling | Ensure water supply is on and inlet valve is clean. |
| F2 | Drainage Problem | Dishwasher is not draining | Clean the drain hose, pump, and filter. |
| F3 | Heating Problem | Dishwasher isn’t heating | Test the heating element and thermostat. |
| F4 | Overflow or Leak Detection | Excess water detected | Inspect float switch, sensors, and hoses. |
| F5 | Motor Fault | Wash motor not functioning | Test and replace the motor if defective. |
| F6 | Pressure Switch Problem | Water level sensor issue | Clean or replace the pressure switch. |
| F7 | Turbidity Sensor Problem | Water clarity sensor malfunction | Clean or replace the turbidity sensor. |
| F8 | Diverter Valve Problem | Water flow not reaching spray arms | Check for obstructions and replace valve if needed. |
| F9 | Water Softener Problem | Softener system not working | Ensure salt is filled and clean the regeneration valve. |
Tips for Preventing Future Error Codes
- Keep it clean: Regularly clean your dishwasher’s filters and spray arms to prevent clogs.
- Inspect hoses: Check the water inlet and drain hoses periodically for wear or damage.
- Load properly: Make sure dishes aren’t obstructing the spray arms or blocking the drain area.
- Use the right detergent: Avoid cheap or inappropriate detergents that can leave residue and damage components.
- Schedule maintenance: If your dishwasher shows signs of wear, such as strange noises or long cycles, consider regular professional servicing.
(Note: The “F” codes might be specific to certain Hoover models. Your manual is crucial to confirm.)
Important Notes:
- Model Variations: Hoover manufactures various dishwasher models, and the error code systems can vary. Always consult your user manual.
- Flashing Lights/Symbols: Some Hoover dishwashers may use flashing lights or symbols along with or instead of error codes. Your manual will explain this.
- Regional Differences: Hoover dishwashers sold in different regions might have slightly different error code systems.
- Resetting: Often, turning off the power to the dishwasher at the breaker for a few minutes can reset the control board and clear temporary errors. Try this first.
Where to Find the Definitive Information:
- Your User Manual: This is the most important resource. It will have the exact error codes for your specific model. If you don’t have it, try searching online for “[your Hoover dishwasher model number] user manual.”
- Hoover Website: The official Hoover website for your region might have some troubleshooting information, but the manual is usually more detailed.
- Appliance Repair Websites: While these can be helpful, always double-check the information against your user manual to ensure it’s accurate for your model.
If the error persists after basic troubleshooting, please contact a qualified appliance repair technician. They are trained to diagnose and resolve appliance issues safely and effectively.
Click to rate this post!
[Total: 0 Average: 0]
