Kenwood Dishwasher Fault Codes
| Fault Category | Possible Issues | Example Codes | Solution |
|---|---|---|---|
| Water Inlet Problems | Insufficient water flow, clogged inlet valve, low water pressure | E01, F1, i10, “Fill Fault”, “Water Supply Issue” | Ensure water supply is on, clean inlet filters, and inspect hoses for blockages |
| Drainage Issues | Water not emptying, blocked drain filter, faulty drain pump | E02, F2, d10, “Drain Fault”, “Pump Obstruction” | Clear drain hose, remove debris from filter, check pump function |
| Washing/Circulation Problems | Spray arms not spinning, blocked nozzles, motor failure | E03, F3, c10, “Wash Motor Fault”, “Circulation Issue” | Inspect and clean spray arms, check motor operation |
| Heating Problems | Dishwasher not heating, faulty heater, temperature sensor issue | E04, F4, h10, “Heating Fault”, “Temperature Sensor Issue” | Contact a technician for heating system diagnosis and repair |
| Sensor Errors | Malfunctioning water level sensor, temperature sensor issues | E05, F5, s10, “Sensor Fault”, “Level Sensor Error” | Seek professional assistance for sensor replacement |
| Electrical/Electronic Issues | Power supply faults, control board issues, loose wiring | E06, F6, e10, “Control Board Fault”, “Power Supply Error” | Qualified technician required for electrical repairs |
| Door/Lock Problems | Door not closing properly, latch malfunction | E07, F7, L10, “Door Lock Fault”, “Door Not Secured” | Ensure the door is shut firmly, inspect the locking mechanism |
| Other/Unclassified Issues | General system malfunctions | E99, “Fault” Indicator | Refer to the user manual or contact Kenwood support |
Click to rate this post!
[Total: 0 Average: 0]
