Table of Contents
What Does E15 Error Code on Your Bosch Dishwasher Mean?
Uh oh! If you are seeing the dreaded E15 error code pop up on your Bosch dishwasher, know that you are not alone. This is one of the most common issues encountered by Bosch dishwasher users. And you don’t have to be an appliance repair expert to know what’s going on or even how to fix it.
We are here to break down what the E15 error code actually means, why it happens, and how you can get your dishwasher back to running like new.
What is the E15 Error Code?
Generally speaking, the E15 error code on a Bosch dishwasher means that the internal flood protection system of the appliance has been activated. In other words, it means there is water in the bottom of the dishwasher where it shouldn’t be.
Bosch dishwashers are fitted with a flood protection system that helps prevent water from damaging your kitchen. The system will switch off the dishwasher automatically when the water has reached the bottom of the unit and display the E15 error code.
What Causes the E15 Error Code?
Some of the most frequent causes of this include but are not limited to the following: Water at the bottom of your Bosch dishwasher could be due to a number of reasons. Following are some of the most frequent causes:
1. Leaking Components
Over time, various seals, hoses, or valves may wear out and start leaking water into the bottom of the dishwasher. Small leaks here and there build up with time and trigger the error.
2. Overloading the Dishwasher
Amazingly, overloading your dishwasher may be one reason for water entering the base when this appliance is fully packed with dishes. It’s best to do no more than recommended by the capacity load.
3. The Clogged Drainage System
A clog or block in the drain prohibits water from running out of your dishwasher and thus causes pools, which switch on the sensor.
4. Spillage During Loading
Sometimes, the problem is not always in the dishwasher itself. Water spilling into the bottom accidentally while setting up the dishes for a cycle can also trigger such a flood protection system.
5. Faulty Float Switch
This acts to open a float switch as part of the flood protection system; if this switch goes bad, it may falsely detect water in the bottom of the dishwasher when it’s dry.
How to Fix the E15 Error Code
Now that you know what E15 code implies, some of the possible causes, roll up your sleeves and into work. The following are the steps to fix the issue:
Step 1: Unplug the Dishwasher
Safety first! Immediately unplug your dishwasher or flip off the power at the circuit breaker. You do not want to take any chances related to electrical hazards when troubleshooting.
Step 2: Pull the Dishwasher Out
Gently pull your built-in dishwasher out to get access to the sides and the bottom. Make sure not to damage any cabinets or flooring.
Step 3: Check for Water in the Bottom
That’s where the problem is. You’ll have to remove the kick panel at the very bottom of the dishwasher to get to the bottom. If there is water standing in the bottom, soak it up with a sponge or towel.
Step 4: Look for Leaks
While you are down there, take a good look at the hoses, seals, and all connections for any signs of leaks or damage. If you find a part that is worn out, you may need to replace it.
Step 5: Check the Drainage System
Disconnect the drainage hose and ensure it is not blocked or kinked. Pass some water through it to clear any blockage that may lead to a backup.
Step 6: Test the Float Switch
The float switch should move freely up and down; if it shows signs of restriction or damage, then it should be replaced as it is part of the flood protection system.
Step 7: Run a Test Cycle
Once you’ve cleared out the water and addressed any potential issues, restore power to the dishwasher and run a test cycle. If the E15 error code doesn’t reappear, congratulations—you’ve successfully fixed it!
When to Call a Professional
If these steps have been followed and the E15 error code still occurs, then perhaps now’s the time to bring in the professionals. Certain issues, such as a specific broken pump or even internal damage on a wide scale, will necessitate particular tools and know-how.
How to Keep Your Bosch Dishwasher Running
To avoid experiencing this E15 error code again, here are some simple tips for maintaining your dishwasher:
- Load with Care: Do not overload the dishwasher and arrange your dishes properly for good water flow.
- Clean Regularly: Rinse filters, spray arms, and drainage to avoid clogs and accumulation.
- Check for Leaks: Periodically inspect seals and hoses for small leaks before they become giant headaches.
Conclusion
An E15 error code in your Bosch dishwasher is a nuisance, and by all means, it should not be treated like one; with the proper approach, this is something you are capable of dealing with. Just a bit of troubleshooting and some maintenance may greatly extend its lifespan and also reduce future issues with your dishwasher.
Got your dishwasher back on track? Celebrate with a sparkling load of spotless dishes! And if you’ve hit a roadblock, don’t hesitate to call a professional for help.
Here’s to stress-free dishwashing