Table of Contents
How to Fix Error Code E15 Neff Dishwasher?
If you are staring at an E15 error code on your Neff dishwasher and feeling uncertain about what to do, well, don’t feel like you’re alone. When this common problem strikes at any random moment, it just makes you question whether you’ll need professional help. Fortunately, understanding what this code means and how to address it can save you time, stress, and possibly even the cost of a service call.
What Does Neff Dishwasher Fault Code E15 Mean?
Error code E15 appears once your dishwasher senses water inside its base and thus turns on the anti-flood system of the appliance. Basically, it is a precautionary measure to prevent any sort of damage with water. While that sounds scary, it is often due to tiny problems-leakage, blockages, or even overfill when the machine is in operation.
Fortunately, many of these E15 errors can be repaired at home without the expertise of a professional. Below, we take you through a step-by-step process on how to diagnose and fix the issue.

Step 1: Switch Off and Unplug Your Dishwasher
First things first, safety first: switch off your dishwasher and then pull it from the power. If you can’t reach the plug, just simply switch off the relevant fuse or circuit breaker. This is one step that you shouldn’t bypass; this is for your own safety whenever you go and try to see or fix some electrical appliance.
Step 2: Find the Leak
Open the dishwasher door and look for visible water inside or at the bottom of the unit, or any signs of leakage, such as pooled liquid or damp spots. Water in the base of the dishwasher is often the reason for the E15 error. Here’s how to locate the cause:
Check the seals: The seal around the door shouldn’t show wear, crack, or even pieces of debris that may interfere with its effective closure. This could require cleaning of the seal or replacing it, if necessary.
Check the hoses: Most of the time, these are around the back. Look for kinks, splits, or loose connections in the hoses. A split hose can allow water to leak. Tighten or replace as required.
If you find a leak, you may be able to resolve the E15 error by fixing it.
Step 3: Dry the Bottom of the Dishwasher
If there is water in the bottom of your dishwasher, then you often can fix the problem by draining and drying it. To do so, follow these steps:
Manually Remove Water: Take a towel or sponge and carefully blot up any visible water from the bottom of the dishwasher.
Tilt the appliance: Gently tip the unit forward, shallow, at an angle of about 45 degrees, to fully drain the remaining water. Prepare for spilling water with towels or bowls ready.
When the bottom is dry, the flood protection should automatically reset. If the water continues to build up, further investigation will be needed.
Step 4: Check for Blockages
These can impede the water flow and may also activate the anti-flood mechanism. Some of the main places where blockages are found include: The filter: This is at the bottom of the dishwasher. Take it out and clean it. Here, food and fat usually accumulates and stops the flow of water. The drain: Look directly down the drain to ensure this is clear. If it seems blocked, carefully remove it.
Spray arms: remove the spray arms and check for clogged holes. Run them under warm water to remove buildup of food or mineral residue.
Cleaning these regularly will help in avoiding E15 errors in the future.
That’s all.
Step 5: Reset the Dishwasher
Finally, after all the steps above, reconnect the dishwasher and turn it on. Run a short cycle, just for self-assurance that indeed this is resolved. If the E15 error no longer appears, congratulations—the problem has been fixed!
If this does not work, then the problem may be more serious, such as a faulty float switch, water pump, or sensor. These issues normally require a professional technician for diagnosis and repair.
How to Avoid E15 Errors in the Future
Fixing an E15 error is one thing, but preventing it from occurring again is even better. Here are some tips to keep your Neff dishwasher running smoothly:
Cleaning of the filter should be done quite often: get into the habit of rinsing it every few uses to avoid blockages from building up. Periodically check hoses for wear and tears to replace them where necessary, whether inlet or drain hose. Avoid overloading your dishwasher, as that may cause water to spill into areas that will trigger the E15 error.
Check the seal of the door: The seal of the door should be kept clean and intact because it is from here that most leaks begin.
Your chances of encountering the E15 error code again will be minimized by being proactive with maintenance.
When to Call a Professional
In case you have executed all the steps above and the E15 error isn’t cleared, then it is time to get the expert on board. Maybe there is some deeper fault present, and that may need some tools and some know-how to sort out. You can get in touch with Neff for customer support services or any other appliance repair professional whom you trust locally.
Conclusion
While the neff dishwasher fault code E15 can be a nuisance to anyone, in actuality, most often the solution is literally at your fingertips. In the majority of instances, by using one or several of the aforementioned steps, you’ll be able to troubleshoot and get rid of the issue without any kind of professional help.
Have a Neff dishwasher and an E15 error? Follow the steps now for a clean kitchen, taking much of the hassle out of doing the dishes.