Table of Contents
Understanding Fagor Dishwasher Fault Codes: A Complete Guide
Nothing beats the joys of a Fagor dishwasher after a long day-until it decides to flash you some cryptic error code instead of cleaning your dishes, that is. But rest assured, those fault codes aren’t as intimidating as they read. In simple terms, each one is just saying, “Hey, I need a little help over here!” And with the right insights, you’ll be able to troubleshoot like a pro in no time.
This blog explains some of the most common fault codes with Fagor dishwashers and what to do with them. For squeaky cleaning of dishes again, let’s proceed further.

What Are Fault Codes, and Why Do They Happen?
Fault codes are your dishwasher’s way of telling you where the problem is. They pop up on your display panel to notify you that something is wrong, be it a clogged filter, a problem with water drainage, or even just a maintenance reminder. Think of them as your dishwasher’s way of saying, “Help me help you!”
By learning how to decode these messages, you frequently can fix the problem yourself or have the right information if you have to seek out professional help.
Common Fagor Dishwasher Fault Codes and How to Fix Them
Common Fagor Dishwasher Fault Codes and How to Fix Them
Fault Code | What it Means | Quick Solution |
---|---|---|
F1 | 👀Water Supply Issue: Dishwasher isn’t getting enough water or no water at all. Could be due to kinked hose, closed valve, or low pressure. |
Quick Fix: Open water valve fully and check for kinks in the inlet hose.
|
F2 | 👀Water Drainage Issue: Dishwasher struggling to drain water after cycle. Usually indicates blockage. |
Quick Fix: Remove and clean the filter, check for visible blockages in drain hose.
|
F3 | 👀Heating Issue: Dishwasher unable to heat water to required temperature. Possible faulty heating element. |
Quick Fix: Reset the dishwasher. If problem persists, call a technician.
|
F4 | 👀Overflow or Leak Detected: Excess water inside dishwasher indicating leak or overfilling. |
Quick Fix: Clear any standing water and check for obvious leaks around seals.
|
F6 | 👀Blocked Spray Arm: Spray arm unable to spin freely or blocked with debris. |
Quick Fix: Remove spray arm, clean thoroughly, ensure it spins freely when replaced.
|
F8 | 👀Door Not Closing Properly: Door isn’t sealing shut, preventing operation. |
Quick Fix: Check for items preventing door closure, inspect door seal for damage.
|
1. F1 – Water Supply Issue
🔍 What it means: Your dishwasher isn’t getting enough water-or maybe no water at all. This could be due to a kinked hose, a closed water supply valve, or even low water pressure.
🔧 How to fix it:
- Check your water supply. Make sure the valve is fully opened.
- Check the water inlet hose for twists or blockages. If so, straighten it out.
- You may also want to check your water pressure at home; if it is too low, the dishwasher will have a hard time operating.
2. F2 – Water Drainage Problem
🔍 What it means: The dishwasher is having trouble draining water after a cycle. This almost always points to a blocked or clogged drain filter or hose.
🔧 How to fix it: First, clean the filter at the bottom of your dishwasher; chances are that it’s clogged with food particles and dirt. Check your drain hose for any kinked, clogged, or blocked areas and clean out blockages found therein. Ensure your sink’s drain is free, as sometimes for the dishwater to drain, it needs a free and open sink drain.
3. F3 – Heating Problem
What it means: Your dishwasher is not heating the water to the right temperature. It may be due to a faulty heating element or temperature sensor.
🔧 How to fix it:
- First, check the thermostat and heating element for any obvious signs of damage or wear.
- If you’re not comfortable tackling these components yourself, reach out to a technician. These issues often require professional repair.
4. F4 – Overflow or Leak Detected
What it means: There’s too much water inside the dishwasher, generally because of a leak or an overfilling issue.
How to fix it:
- Check your dishwasher interior for any leakage or pooling of water.
- Ensure the drain pump and filters have no blockages.
- If you find a leak either in the hose or the machine, it needs to be replaced.
5. F6 – Blocked Spray Arm
What it means: The spray arm which dispenses water inside your dishwasher is likely blocked or cannot turn freely.
How to fix it:
- Spray arm: Remove the spray arm and clean any blockages from it. Run water through it to dislodge any food particles.
- Ensure the spray arm is correctly refitted and can rotate freely.

6. F8 – Door Not Sealing
What it means: The door is not sealing and the dishwasher does not start.
How to fix it:
- Check for blockages around the door gasket, which may be causing it not to close.
- Check your gasket for wear or tear; if it’s damaged, replace it, and this should resolve the problem.
- Don’t overload the machine. Sometimes bulky items may cause the door not to close correctly.
Tips to Avoid Seeing Fault Codes Again
We know you’d prefer to spend your time enjoying spotless dishes rather than troubleshooting your dishwasher! Here are some simple maintenance tips to keep your Fagor dishwasher running smoothly:
- Rinse your dishes before loading. While many dishwashers advertise that they can handle dirty plates, large food debris can still clog the filters.
- Clean the filters regularly. Check and rinse them once a week for blockage prevention.
- Never overload the machine. Overloading hampers the flow of water, hence, the poor cleaning of dishes.
- Hoses should be inspected regularly. Kinks or damages in them may lead to draining or water supply issues.
When to Call a Professional
While many error codes can easily be resolved by an individual with some hands-on skills, some are in need of a professional attitude. If your dishwasher is not working after trying the tips above, consider hiring a technician. You really risk further damage or rendering your warranty inoperable if you do more than just minor adjustments by yourself.
Conclusion
Fault codes are not something to be afraid of. A little knowledge, some elbow grease, and most problems with your Fagor dishwasher will be fixed. Knowing what those blinking error codes mean means you can keep your dishwasher running like new and enjoy the convenience a lot more.
Still feeling stuck? Share your experience in the comments! Or, if you’re due for a replacement, explore our curated selection of eco-friendly dishwashers designed to save water and energy.