Hisense Dishwasher Error Codes and Solutions
| Error Code | Description | Cause | Solution |
|---|---|---|---|
| E1 | Water Inlet Fault | Dishwasher isn’t filling | Check water supply, inlet valve, and hose. |
| E2 | Drainage Fault | Water isn’t draining | Clean filter, check drain hose, and inspect pump. |
| E3 | Heating Fault | Water isn’t heating | Test heating element and thermostat. |
| E4 | Overflow/Leakage | Too much water or a leak detected | Check water level sensor, inlet valve, and hoses. |
| E5 | Motor Fault | Issue with wash motor | Check motor functionality, replace if faulty. |
| E6 | Pressure Switch Fault | Water level detection issue | Test and replace the pressure switch if needed. |
| E7 | Turbidity Sensor Fault | Water clarity sensor issue | Clean or replace the turbidity sensor. |
| F1 | Water Inlet Issue | Dishwasher isn’t filling | Ensure water supply is turned on and inlet valve is clean. |
| F2 | Drainage Issue | Dishwasher is not draining | Clean the drain hose, pump, and filter. |
| F3 | Heating Problem | Dishwasher isn’t heating | Test the heating element and thermostat. |
Click to rate this post!
[Total: 0 Average: 0]
