Hoover Dishwasher E8 Error Code

Understanding and Fixing the Hoover Dishwasher E8 Error Code

A dishwasher is one of the unsung heroes of a modern home, taking so much of the headache out of kitchen cleanup, day in and day out. Of course, even the most trusty appliances will have their off days. If you’re here, you probably found yourself facing the E8 error code on your Hoover dishwasher and wondered what that is and how to fix it.

Rest assured, this post will break down all you need to know about the E8 error code and proffer actionable steps for getting your dishwasher back to work.

What does the E8 error code mean on my Hoover dishwasher?

E8 generally appears if something has gone wrong with the water-circulating system of your dishwasher. It essentially means the rotary spray arms aren’t working as they should; hence, the water does not circulate through the system correctly.

Thus, this can’t let the dishwasher clean the dishes correctly and alerts with an error code to attract attention toward a certain issue in such a case.

Causes of the E8 Error Code

There are numerous causes for the Hoover dishwasher E8 error. The following are some of the most common and what could be causing the problem:

Blocked Spray Arms – Food particles, grease, or other elements can block the spray arms, limiting their movement and preventing them from spraying water properly.

Faulty Circulation Pump: A damaged or faulty circulation pump cannot circulate the water to the spray arms. Clogged Filters: Clogged filters restrict water flow, which again reduces the pressure required for spinning the spray arms. Low Water Pressure: Insufficient water pressure in your house supply disrupts the working of the dishwasher and leads to this error.

How to Reset the E8 Error Code on a Hoover Dishwasher

Follow these steps to troubleshoot the E8 error code and have your dishwasher up and running again.

1. Cleaning of the Spray Arms

Most times, an E8 error results from spray arms which are blocked. To rectify this problem:

  • Remove the spray arms of the dishwasher according to your user manual’s instructions.
  • Clean them under warm running water to remove bits of food and grease. Use a toothpick or fine wire to clean stubborn blockages in the nozzles of the spray arms.
  • Reattach the spray arms and make sure they are able to spin freely.

2. Check for Clogs in the Filters

After some time, filters block with food particles, which interferes with water flow. Position your filters at the bottom of your dishwasher and remove them. Run them under warm water and, with a soft brush, remove each of the buildups. Return the filters and lock them up.

3. Check on the Water Pressure

Low water pressure feeding your dishwasher can hinder the dishwasher from working as expected. Check your home’s water supply to confirm it meets the manufacturer’s recommended pressure level, typically between 20 and 120 psi.

If the water pressure appears to be low, contact a plumber to correct the situation.

4. Check the Circulation Pump

If the problem persists even after cleaning the spray arms and filters, the circulation pump could be the culprit.

  • Access the circulation pump (consult your user manual for guidance).
  • Look for visible damage or signs of malfunction.
  • Testing or replacing the pump may require professional assistance if you’re unfamiliar with electrical components.

5. Restart Your Dishwasher

After addressing the potential issues, reset your dishwasher to clear the error code.

  • Turn off the dishwasher and unplug it from the power source.
  • Wait for five minutes before plugging it back in.
  • Turn the dishwasher back on and run a test cycle to verify the problem is fixed.

When to Call a Professional

While this should correct the E8 error code through the steps above, sometimes problems do require professionals. If the error reoccurs or if one is uncomfortable with the above troubleshooting steps, best course of action is to call a Hoover certified technician.

How to Avoid E8 in the Future

Prevention is the best medicine to avoid any further inconvenience. Following are a few tips to maintain your dishwasher and keep it at a run:

  • Rinsing dishes for big food particles beforehand.
  • Clean spray arms and filters regularly to avoid buildup.
  • Schedule regular maintenance to catch the problems before they become major issues.
  • Ensure that the water supply to your home is sufficient enough to meet your dishwasher’s needs.

Conclusion

Hoover dishwasher’s this E8 error code could be frustrating, nonetheless it is a fixable glitch. You can sort it out yourself as well by observing your spray arms, filters, water supply, and circulating pump.

For persistent problems or repairs that are a bit more complex, always consult with a trusted professional who can have your dishwasher in perfect shape. Regular cleaning and maintenance will go a long way toward preventing similar issues in the future.

In the case that your Hoover dishwasher works fine even after the fixing of the E8 error, that’s just something to pride yourself on, for having conquered the hurdle and breathed life back into the poor appliance. Go back to getting those dishes shining, and with minimum hassle in washes.

Click to rate this post!
[Total: 0 Average: 0]
Spread the love