| Fault Code | Cause | Solutions |
|---|---|---|
| E1 | Water Inlet Fault | Check water supply, inspect inlet hose, examine inlet valve, clean inlet filter |
| E2 | Drainage Fault | Check drain hose, clean filter, inspect drain pump, verify sink drain |
| E3 | Heating Fault | Check heating element, inspect thermostat, examine control board |
| E4 | Overflow/Leakage Detected | Check water level sensor, inspect for leaks, test inlet valve, examine float switch |
| E5 | Motor Fault | Test motor, inspect wiring connections, examine capacitor |
| E6 | Pressure Switch Fault | Check pressure switch, inspect pressure hose, clean blockages |
| E7 | Turbidity Sensor Fault | Clean sensor, test with multimeter, inspect wiring |
| E8 | Diverter Valve Fault | Inspect diverter valve, test valve motor, examine spray arms |
| E9 | Water Softener Fault | Check salt levels, inspect softener unit, clean resin bed |
| EA | Communication Fault | Reset dishwasher, inspect wiring harnesses, test control board |
| EC | Heating System Fault | Check heating element, inspect thermostat, examine control circuits |
| EF | Leak Detection Fault | Inspect for leaks, check float switch, dry base pan |
Click to rate this post!
[Total: 0 Average: 0]
