Table of Contents
LG Dishwasher Error Code 1E: What It Means and How to Fix It
Dishwashers make life so easy-until they don’t. If your LG dishwasher is flashing the error code 1E, fear not-it’s not as complicated as it may seem. This blog will break down what the 1E error code means, why it happens, and how you can troubleshoot it on your own.
What does the error code 1E on an LG dishwasher mean?
When error code 1E flashes in your LG dishwasher, it means this is your appliance’s signal of some fault either with water intake or supply. More precisely, the code 1E most often indicates some blockages within clogged filters that do not allow a sufficient amount of water to get into the dishwasher for a proper cycle.
But here is the good news-it’s usually fixable without an expensive repair.
Common Causes of Error Code 1E
Understanding why this error happens is the first step to fixing it. Here are the most common culprits behind the 1E error code in LG dishwashers:
Clogged Water Inlet Filters
A build-up of debris, sediment, or hard water residue in these filters will make them clog and obstruct the flow of water into the dishwasher.
Kinked/Blocked Water Supply Hose
If a kink occurs in a water supply hose, or either ends of its connection get blocked/clogged, then water would not reach your appliance.
Low Pressure
Dishwashers operate with the use of water pressure. An inadequately low level of water pressure is one possible source of an occurring 1E error in your device.
Faulty Water Inlet Valve
A malfunctioned water inlet valve might be incapable of monitoring or regulating the proper amount of water entering a dishwasher and hence impeding the right execution of any running cycle.
LG Washer Error Code 1E
Some minor issues can quickly be resolved without calling a specialist. Follow the following steps easily to troubleshoot and fix this 1E error code in your LG dishwasher:
1. Check Water Inlet Filters for Blockage and Clean
- Switch the dishwasher off just for your safety.
- Look for water inlet filters at the connection point of the supply hose to the dishwasher.
- Remove the filters and wash them under running water to remove dirt or debris. A soft brush can help remove stubborn buildup.
- Reinstall the filters and power the dishwasher back on to see if the error clears.
2. Check the Water Supply Hose
- Check the water supply hose for any kinks or bends that could hamper the water supply.
- Straighten the hose if you find any kinks.
- Pull off the hose and clean any blockages you may find; you may use water to flush it out, ensuring it is clear.
3. Check Your Water Pressure
Dishwashers need about 20-120 psi in terms of water pressure to run with no glitches or hiccups. If it seems low to you, try testing at a nearby faucet by using a pressure gauge.
If the issue is your home’s water pressure, consider contacting a plumber to resolve the problem.
4. Inspect the Water Inlet Valve
- If the water inlet filters and hose are clear, but the problem persists, the issue might lie with the water inlet valve.
- Check the valve for wear or breakage. If defective, replace. This will be a more complex repair, possible best left to the professional.
When to Call in the Experts?
If you’ve followed the steps above and the 1E error code still won’t clear, it may be time to seek professional assistance. Issues like a damaged water inlet valve or internal component failures could require expertise and replacement parts. LG customer support or a licensed technician can help diagnose and repair the problem effectively.
Preventing Future Error Codes
Maintenance Tips to keep your dishwasher running smoothly and to avoid similar error codes:
- Clean the water inlet filters regularly to avoid building up any sediment.
- Check and straighten water supply hoses after installation or cleaning.
- Periodically check your water pressure, especially if you live in an area that has frequent fluctuations in water pressure.
- Run a descaling agent through the dishwasher every few months to help prevent hard water buildup.
Final Thoughts
An LG dishwasher with an error code reading 1E might sound like it’s a huge pain, but it generally can be fixed pretty quickly by doing some basic troubleshooting. This, in knowing common causes and having done due maintenance, will also protect you from future problems. If all else goes wrong, this is the time to get hold of LG customer support for help. After all, a happy dishwasher makes for a happy home! So, don’t let the dread of some error codes make you forgo the ease of a dishwasher. Follow these tips and tricks, and you are good to go in case something goes wrong with your LG dishwasher.