Table of Contents
How to Fix the Neff Dishwasher E19 Error Code
If you have been getting an E19 error code on your Neff dishwasher, you must be frustrated. Don’t worry, it’s usually quite a common problem that can be repaired with the right approach. In this article, we’ll explain what an E19 error really means, why it could occur, and the steps you can take to fix it.
What is the Neff Dishwasher E19 Error Code?
Error code E19 shows some problem in the water circulation system of the dishwasher. More precisely, this error code shows a problem with the heat exchanger or the water flow control system. This may mean that water is not circulating properly inside the dishwasher, which can affect its cleaning ability.
While this sounds like a technical fault, this is not always specialist work to identify the cause of this problem. Sometimes, it’s something simple that will get your dishwasher up and running again.

What Causes an E19 Error Code?
There are several reasons why the E19 error code may appear on your Neff dishwasher:
Faulty heat exchanger valve: This is one of the most common causes that create the E19 error code. It may be broken or clogged and impede the normal water flow. Control module malfunction: A faulty control module can give wrong signals and upset the system. Water leakage: Minor leaks inside the internal parts can also activate the error code.
Blockages or limescale build-up on the heat exchanger or tubes can also make the water flow inadequately.
Knowing what went wrong will set the basis on which you address the problem accordingly.
How to Troubleshoot and Fix E19 Error Code
Before that, ensure your dishwasher is unplugged or kept off for the safety of you and it. Proceed thus:
1. Simple Reset
The error E19 sometimes can be due to some temporary glitch in the control system. Switch off your dishwasher from the mains supply for a period of 10-15 minutes. Reconnect and switch it on to check whether the error is coming.
If this doesn’t fix it, proceed further with the next step.
2. Check the Heat Exchanger Valve
As it controls the flow of water into the dishwasher, a fault here is one of the other most common causes of the E19 error. Open the dishwasher and locate the heat exchanger, usually near the side wall. Check for blockage or visible damage. If clogged, the valve must be cleaned carefully.
The replacement may be needed if the valve is damaged. Replacement valves can be ordered from Neff directly or from any other approved part supplier.
3. Search for Leak or Blockages
Small leakages and blockages result in interference with the water circulating mechanism of the dishwasher. Remove the bottom panel of the dishwasher to see the signs of leaks and the collected water.
Check for blockages in the pipes or heat exchanger caused by food debris or mineral buildup. If you find limescale, try eliminating it using a descaling solution and flushing out the system.
4. Check the Control Module
The control module relays signals to different parts of your dishwasher. In the event of malfunctioning, you may need to replace it.
Access the control module, but do so very carefully; refer to your user manual for guidance.
Look for apparent damage, like burn marks or loose connections. If any damage is found, it may be time for a replacement.
5. Call in Professional Help (If Necessary)
If all of the above steps fail, then it might be time to call a professional Neff technician since sometimes the problem can be with components inside the appliance that may need advanced diagnostics and repair tools.

E19 Error Prevention for the Future
To avoid the E19 error from happening again, go through these maintenance tips: install a water softener if you are residing in a hard-water area to avoid limescale buildup.
Clean the filters and spray arms from time to time to ensure nothing impedes the water flow.
Run cleaning cycles periodically with dishwasher cleaners to maintain the internal parts in good condition.
Check the machine from time to time for any trace of leakage or worn-out parts, such as hoses or valves.
Conclusion
Encountering an E19 error code on your Neff dishwasher may be inconvenient, but it’s not the end of the world. By diagnosing the problem and following these steps, you’ll be back to spotless dishes in no time. Remember, routine maintenance is key to keeping your dishwasher running smoothly over the long term.
If you’re unsure or uncomfortable with any of these steps, don’t hesitate to contact a professional. They can ensure your dishwasher is fixed safely and efficiently.
Got a helpful tip or experience fixing an E19 error? Share it in the comments below we’d love to hear from you!