Siemens Dishwasher Fault Codes and Solutions
| Fault Code | Description | Cause | Solution |
|---|---|---|---|
| E01 | Water Inlet Fault | Dishwasher isn’t filling | Ensure the water supply is active and inspect the inlet valve and hose for blockages or damage. |
| E02 | Drainage Fault | Water isn’t draining | Clear any clogs from the filter, drain hose, and pump to restore proper drainage. |
| E03 | Heating Fault | Water isn’t heating | Verify the functionality of the heating element and thermostat, replacing if necessary. |
| E04 | Overfill/Leakage | Too much water or a leak detected | Examine the water level sensor, inlet valve, and hoses for signs of leaks or malfunctions. |
| E05 | Motor Fault | Issue with wash motor | Check the motor for operational issues and replace it if found defective. |
| E06 | Pressure Switch Fault | Water level detection issue | Test the pressure switch for accuracy and replace if it’s not functioning properly. |
| E07 | Turbidity Sensor Fault | Water clarity sensor issue | Clean the turbidity sensor thoroughly or install a new one if it’s defective. |
| E08 | Diverter Valve Fault | Water not reaching spray arms | Inspect the diverter valve for issues and replace it if it’s malfunctioning. |
| E09 | Heating System Fault | Dishwasher isn’t heating | Check the heating element and ensure all wiring connections are intact and secure. |
| E10 | Circulation Pump Fault | Pump not operating properly | Assess the circulation pump for obstructions or damage, cleaning or replacing as needed. |
| E11 | Drying System Fault | Dishwasher isn’t drying properly | Review the drying fan, heating component, and ventilation system to identify any issues. |
| E15 | Leakage Detected | Water leaked into the base | Inspect all hoses, seals, and the inlet valve for potential leaks and address accordingly. |
| E22 | Blocked Filter/Spray Arm | Filter or spray arm clogged | Remove and clean the filter thoroughly, ensuring spray arm holes are free from debris. |
| E24 | Drainage Problem | Water not draining | Inspect the drain hose and filter, clearing any blockages that hinder water flow. |
| E25 | Drain Pump Problem | Drain pump malfunction | Check the drain pump for obstructions, clean it, and replace if it fails to function properly. |
| E30 | Water Level Sensor Issue | Incorrect water level readings | Examine and clean the water level sensor or replace it if it shows signs of failure. |
Click to rate this post!
[Total: 0 Average: 0]
