Table of Contents
AEG Dishwasher Error Code 60 – What It Means and How to Fix It
If you are getting Error Code 60 on your AEG dishwasher, don’t panic. You are not alone, and this is a common issue that can be resolved with a bit of troubleshooting. This guide will explain what this error code means, what might be causing it, and clear steps to help you get your dishwasher back in action.
What does AEG Dishwasher Error Code 60 mean?
Error Code 60 on an AEG dishwasher generally means a fault in the heating system. More precisely, this means that the water inside the dishwasher does not reach the temperature it should have in a specific period. If the water is not heated appropriately, the dishes will not be cleaned, and the machine simply turns itself off to prevent further damage.
Possible Causes for Error Code 60
This can be due to a number of reasons. The most probable causes include:
Faulty Heating Element
The heating element warms the water. So, if this element is defective or cannot function well, the dishwasher would not be able to heat up the water.
Temperature Sensor Problems
The temperature sensor or thermostat senses the temperature of the water. If it doesn’t function well, the dishwasher thinks the water isn’t heating though it actually does.
Clogged/Blocked Components
The partial blockage of the system would result in restriction to the proper flow of the water, hence poor heating.
Faulty Control Board
The heating process is controlled by the electronic control board. A defective electronic control board may fail to send appropriate signals to the heating element.
How to Fix Error Code 60
From the above, we know what Error Code 60 signifies. Here’s a step-by-step guide on how to locate and fix the problem safely.
Step 1: Restart the Dishwasher
Sometimes, the code may appear due to some glitch. Restarting your dishwasher may make the code disappear:
- Switch the dishwasher off and pull it from power.
- Let it be for 5–10 minutes to allow the system to refresh.
- Plug it back in and switch it on.
If this doesn’t clear the error, please proceed with the next steps.
Step 2: Check the Filter and Drain System
Check the filter and drain system of the dishwasher for blockages. Blockages may hinder the flow of water and affect the heating process.
- Pull out the bottom rack from the dishwasher.
- The filter is usually at the bottom of the tub; locate it.
- Take out the filter and run it under running water to clean off the debris.
- Check the draining area for any blockages and clean out the blockage.
After being cleared, reassemble the filter and attempt to use the dishwasher again.
Step 3: Test the Heating Element
The heating element is responsible for heating the water. Here is how you can check whether it is or is not functioning properly.
- Safety First – The dishwasher should first be unplugged from the power source.
- Locate the Heating Element: This is usually a round metal thing at the bottom of the dishwasher.
- Inspect It Visually: Just look for any apparent damage, such as cracks or burns.
- Use a Multimeter: If you have a multimeter, the continuity of the heating element can be checked to see if it needs replacement. No continuity means it’s probably faulty.
Step 4: Check the Temperature Sensor
If the heating element seems fine, the issue may lie with the temperature sensor or thermostat. While replacing a sensor might require professional assistance, you can visually inspect it to ensure it isn’t damaged or disconnected.
Step 5: Examine the Control Board
If there are no blockages and also no issues with heating, then the control board may be at fault. More complicated is the control board, which sends signals to the dishwasher for heating of water. In most instances, if this is faulty, replacement or repair is best left to a technician.
Step 6: Call a Professional
If none of these troubleshooting methods resolve the issue, then it is time to seek the services of a professional appliance technician. They will be able to diagnose the problem more accurately and perform safe repairs.
Preventing Future Issues
In order to avoid Error Code 60 in the future, here are some easy maintenance tips for your AEG dishwasher:
- Clean Filters Regularly: Rinse the filters every few weeks to avoid blockages.
- Run Maintenance Cycles: The cleaner or white vinegar helps in clearing limescale or grease buildup inside the dishwasher once a month.
- Check Hoses and Seals: Ensure that there are no leaks or blockages in the inlet and drain hoses.
- Avoid Overloading: Give your dishwasher some space to do its job. Do not overload it.
Conclusion
Error Code 60 may look big and menacing, but most of the time, it will only take some patience and the above steps to repair the problem on your own. Troubleshooting helps uncover the root cause of the problem, whether a minor blockage or a defective component.
Need additional help? Don’t hesitate to reach out to a trusted technician to ensure your dishwasher gets the care it needs. Keeping up with regular maintenance can also ensure your appliance runs smoothly for many years to come.
By addressing the problem head-on, you’ll soon be back to sparkling dishes and stress-free cleaning.